- Install Mikrotik Via Usb Flashdisk 8
- Install Mikrotik Via Usb Flashdisk Windows 10
- Install Mikrotik Via Usb Flashdisk Mac
- Install Mikrotik Via Usb Flashdisk Download
- Install Mikrotik Via Usb Flashdisk Software
- Tutorial Install Linux dalam USB Flashdisk Assalamualaikum wr wb, salah satu kelebihan Linux sebagai sistem operasi adalah dapat digunakan di berbagai media. Linux dapat digunakan sebagai Live CD maupun sebagai Live USB.
- Install Debian 8 via usb ( Flashdisk ) 1. Download Debian CD Iso dari situs resmi debian disini debian-8.4.0-amd64-CD-1.iso dan download win32diskimager disini Win32DiskImager-0.9.5-install.exe. Buat usb installer dengan win32diskimager.
- MUM Brazil 2008 MikroTik 19 Troubleshooting GPRS Can you talk to the modem at all? – Use serial terminal on usb port and try to issue some AT commands (AT, ATI, AT+CPIN=? Is the SIM card requiring to enter the PIN? – Disable PIN request, or, – Include it into the modem initialization string Consult – Any GPRS AT Command Reference.
- Using a USB modem Internet connection and Mikrotik. The USB port on the device like a PC, can be used for additional storage media like USB flash disk. It can also function as an interface to connect the modem 3G/EVDO. Mikrotik making devices more flexible in installation, especially in a location that has not been affordable Internet.
The USB port on the device like a PC, can be used for additional storage media like USB flash disk. It can also function as an interface to connect the modem 3G/EVDO. Mikrotik making devices more flexible in installation, especially in a location that has not been affordable Internet connections typically use wired or wireless.
Install Mikrotik Via Usb Flashdisk 8
The device has support RouterBoard USB interface has a discrete code 'U' as RB411U, RB411UAHR, RB433UAH, RB751U-2HnD, RB751G-2HnD, RB750UP and so on. (Note: For the USB power injector RB411UAHR needed to turn a USB device).
Topology
In this article will be given a step by step tutorial to use the USB port for the modem, as the picture of the network, this tutorial uses the RouterBoard Indoor RB751U-2HnD and 3G sierra 881U modem, which forms the topology like the one in the image below:Here are some steps we have to do in the configuration:
IP Address
The first step we add our router is the IP address on the interface that will be used for the local network.
Wireless Access Point
The next wlan1 enable interface as an access point for the distribution of wireless connection to a local network.
DNS
For the DNS settings we need to enable the parameter 'allow remote request' so that our client can request the DNS to our router.
USB Devices
If the IP interface (Ethernet and wireless) and DNS is configured, we pair our 3G modem into the USB port on the router. Things we need to check the return is the '/ system resource usb'.For devices that are supported Mikrotik, usually a new USB device will appear automatically. Mikrotik also will build a new interface 'ppp-out1'.PPP Dial-OutTo enter the Username, Password and APN from our provider, our input interface ppp-out1 that have been made by Mikrotik.
NAT Masquerade
The last step, we have to add srcnat masquerade for ppp-out1 interface so that the client can access to the internet.Note: Make sure that the modem you are using is sikenali by Mikrotik OS. A complete list of modems that have been recognized by the OS Mikrotik at:
Topology
In this article will be given a step by step tutorial to use the USB port for the modem, as the picture of the network, this tutorial uses the RouterBoard Indoor RB751U-2HnD and 3G sierra 881U modem, which forms the topology like the one in the image below:Here are some steps we have to do in the configuration:
IP Address
The first step we add our router is the IP address on the interface that will be used for the local network.
Wireless Access Point
The next wlan1 enable interface as an access point for the distribution of wireless connection to a local network.
DNS
For the DNS settings we need to enable the parameter 'allow remote request' so that our client can request the DNS to our router.
USB Devices
If the IP interface (Ethernet and wireless) and DNS is configured, we pair our 3G modem into the USB port on the router. Things we need to check the return is the '/ system resource usb'.For devices that are supported Mikrotik, usually a new USB device will appear automatically. Mikrotik also will build a new interface 'ppp-out1'.PPP Dial-OutTo enter the Username, Password and APN from our provider, our input interface ppp-out1 that have been made by Mikrotik.
NAT Masquerade
The last step, we have to add srcnat masquerade for ppp-out1 interface so that the client can access to the internet.Note: Make sure that the modem you are using is sikenali by Mikrotik OS. A complete list of modems that have been recognized by the OS Mikrotik at:
This guide will describe how to install a full Linux OS on an USB flash disk with permanent storage feature, i.e. The system does not lost your files after a reboot as usual live distribution does. The system is fully operable OS and transferable to any PC with all your installed and saved stuff.
There will come a time when, after some amount messing around with OpenWRT, you will run out of storage, and won't be able to install any more packages or even create any more files. At this point you can consider upgrading to a router with a bigger flash memory, but if the router is otherwise working fine, and has a USB port, why not use a USB Flash Disk as your storage instead? Here are the steps to set up a USB Flash Disk as OpenWRT storage.
I did this on my TP-Link 1043ND V2, with a USB2 sandisk cruzer fit 8GB plugged into the USB port.
Backup Your Current Settings
- You'll want this if you screw up. Particularly if this is your internet router, and you've put in effort to get it working.
- The easiest way to do a backup is System -> Backup -> Generate Archive. This appears to be a backup of the most package subfolders in /etc folder.
- Note that there can be other stuff that needs backing up, especially if you created them outside of packages. For extra safety, I also did a:
- This backup probably can't be restored via Luci, but will be useful if you've somehow lost everything and need to set things up from scratch.
Install Mikrotik Via Usb Flashdisk Windows 10
Reset Your Router
- If you've got lots of space left in your existing onboard flash, this is probably not necessary. In my case, I was down to around 500k free space, so I thought it would be a good exercise to reset the router back to openWRT factory settings. This would also be a good chance to confirm I've documented my setup steps properly.
- Configure your router for internet access. At least this fills up your original overlay file system with the bare minimum to get internet access.
Configure for Pivot Overlay
- Execute the following:
- Partition the flash disk. I had 8GB, so created a 2gb and 5.5gb partition using fdisk:
Install Mikrotik Via Usb Flashdisk Mac- Format the flash disk. Execute the following:
- ... and we're done! Log into to the router, and 'df -h' should now show a massive amount of storage for / and /data:Install Mikrotik Via Usb Flashdisk Download
- I'm not actually quite sure what happens if you were to reset the system after this ... my guess is that OpenWRT would remove the /overlay which is on the USB flash disk. But the config on the /overlay on the built-in flash would then have stuff that is not in USB /overlay. To be safe, it's probably better to remove the USB flash disk and reset and reformat and repeat the above steps from scratch if you're planning to revert the system.
References:
Install Mikrotik Via Usb Flashdisk Software
Coments are closed